| the Decorative laying is used for registration of an obverse surface of a laying and differs accurate geometrical drawing of seams. To receive various drawings on a wall surface, the laying with various ways of bandaging and a brick apportion is applied, and also the brick of different colours and is used the sizes.
Technology of performance of a decorative laying same, as well as at the usual. But here important correctly to put the bottom number and in the course of work carefully to watch horizontal position and vertical position, and also behind that the thickness of external seams, was identical.
Bricks Leaving on a front plane should have equal sides, a pure surface and an identical colour shade.
At the tied up or not tied up vertical seams the obverse verst has mnogorjadnuju bandaging system, and internal verst and zabutka - single-row. Alternation lozhkovyh and tychkovyh bricks in layings is underlined in the project.
During a laying of corners of the walls which thickness makes two bricks, the first row should have external and internal verst from tychkov. A laying of obverse verst at continuous vertical seams begin with two halves, at interrupting vertical seams - from two trehchetvertok, laid lozhkom. Further process proceeds according to drawing ( fig. 7 ).
a Fig. 7. A serial apportion of a brick at a laying of corners of walls:
And - with continuous vertical seams; - with vertical seams interrupting through three number
Seams on an obverse surface of a decorative laying embroider: at first vertical, then horizontal. Expressiveness of an architectural laying depends on a profile (form) rasshivki external seams. To seams usually give convex, bent, zaglublennuju or odnosreznuju the form. .
The Most widespread variant of a decorative laying is Gothic (Polish) in which alternate tychkovye and lozhkovye numbers of bricks, and krestovaja difficult in which are laid serially tychkovyj and two lozhkovyh a brick. .
Walls in two bricks erect in the thickness how is shown in drawing.
At a laying of walls in the thickness in two bricks in the first row external verst alternate tychkovye and lozhkovye bricks, the internal verst gives all the best the bricks laid tychkom, and zabutka - spoons. The second row of external verst repeats the first, but with bandaging of vertical seams on a facade. Internal verst stack the same as also external, and zabutku carry out tychkami. .
Erection of walls by thickness in two bricks can be made krestovoj by a difficult laying. Thus in forward to a number of external verst alternate tychki with two spoons. The internal verst develops of the bricks laid tychkami, and zabutka - from lozhkov. The Second row of external verst completely repeats the first, but thus the vertical seam should settle down on the middle between spoons underlaying tychka. The internal verst repeats external, and zabutka is carried out from tychkov.
to read further ->