At work with a tree following tools are necessary: a knife-jamb, chisels, a vice, a hammer, flat-nose pliers, drills, nozhovka, files and various skins .
the Knife-jamb necessarily should have an edge in width from 5 to 50 mm, cut at an angle 30-45 °.
the Chisel , applied only together with kijankoj (a wooden hammer), represents the grooving tool for rough work. .
Chisels differ on appearance and actions carried out by them ( fig. 54 ). the Direct chisel with width of a cloth 5 - 60 mm are applied when it is necessary to make deepening in a tree or to level a product surface. .
a Fig. 54. Chisels :
And - straight lines; - semicircular; in - angular; g - chisels-kljukarzy
For creation of roundish lines, smooth contours, removals of wood from some kinds of dredging, are necessary semicircular chisels . They share on kinds depending on width of a cloth and radius of its circle. .
To plan on a tree a contour of the future pattern, are applied angular chisels which differ from each other in the width of a cloth and in corner size (it can make 45-90 °). .
Also at work with wood can be used chisels-kljukarzy which, unlike other kinds of chisels, have the bent cloth. .